Features
The width of the product conveying track is increased, and the driving is fast and stable by adjusting the amplitude angle, which is suitable for ultra-wide transportation of small and medium-sized components.
Installation precautions
- The material path should have sufficient rigidity, otherwise it will be difficult to form resonance.
- When the machine is in suspended support, the support beam must use stiffeners.
- When multiple direct-vibrators are mounted on the same support, the resulting interference creates noise and shifts the position of the workpiece. In such cases, a separate support should be provided for each directly oscillating machine.
- If the track or frame lacks stiffness, it will happen:
- The workpiece in transit will move back.
- The workpiece in the transfer jumps up and down and blocks before and after the feed channel.
- The workpiece is slow and unstable when it leaves the channel groove.
- The workpiece in transit produces a regular interference phenomenon.
SW-350DK
![SW-350DK](https://swoer.com/wp-content/uploads/2024/04/SW-350DK.webp)
SW-450DK
![SW-450DK](https://swoer.com/wp-content/uploads/2024/04/SW-450DK.webp)
SW-550DK
![](https://swoer.com/wp-content/uploads/2024/04/SW-550DK.webp)
SW-1000DK
![](https://swoer.com/wp-content/uploads/2024/04/SW-1000DK.webp)
Reviews
There are no reviews yet.