English 
Spanish 
Czech 
Arabic 
Russian 
German 
French 
Turkish 
Italian 
Ukrainian 
Polish 
Romanian 
Bengali 
Portuguese 
Thai 
Japanese 
Korean 
Hebrew 
Uzbek 
Hindi 
Slovak 
Vietnamese 
Features:
CE certificated, RoHS compliant.
Frequency Adjustment: Output frequency of the controller can be manually adjusted to resonant frequency of the vibratory feeder to get smooth, quiet and energy-saving feed effect.
Automatic High Precision Voltage Regulation: The internal digital voltage regulation circuit can eliminate feed speed variation caused by mains voltage fluctuation.
Time Adjustable Soft Start: The controller will gently increase output voltage from 0 to the preset value when power on to avoid sudden shake. Soft start time can be digitally preset.
Switch Sensor ON/OFF Control: 1 NPN switch sensor or PLC can be connected to turn on/off the controller.
Photoelectric Sensor ON/OFF Control: The CUH Intelligent Photoelectric Sensor can be connected to turn on/off the controller.
Remote Speed Control: Output Voltage of the controller can be adjusted remotely by an external potentiometer, a PLC, or a 1-5V DC signal.
DC Control Output: The controller can output low voltage DC power associated with ON/OFF Control of the controller to drive a solenoid or other external devices.
Keypad Lock: Lock all buttons on the keypad to prevent misoperation by pressing the ON/OFF button and hold for 2 seconds.
Overheat Protection: If internal temperature of the controller gets too high, the controller will stop its output to protect itself.
Overcurrent Protection: If output current exceeds its rated value, the controller will stop its output to protect itself and the load.
Restorable Short Circuit Protection: If output of the controller is short-circuited,the controller will shut down its output to protect itself and the load. But the fuse inside will not be blown. So when there is no short circuit at the output side, the controller will work again after power on.
Max Adjustable Output Voltage: Max Adjustable Output Voltage can be preset to protect the load from damage caused by too high voltage.
Standard Accessories:
Input Power Cable(1.5m) *1
Output Power Cable(1.5m) *1
Remark:Input power cable can be customized to fit the socket in your country.
Optional Accessories:
Intelligent Photoelectric Sensor(1.5m)
Dimensions & Weight:
Dimensions: 190*53.6*94.5(L*W*H, mm)
Weight: SDVC31-S:610g(without accessory)
Technical Specification
| Item | Range | Unit | Description | ||
| Min | Typical | Max | |||
| Input Voltage | 85 | 220 | 260 | V | AV RMS |
| Adjustable Output Voltage Range | 0 | — | 260 | V | Lower than 150% of Input Voltage |
| Voltage Adjustment Accuracy | 1 | V | |||
| Voltage Regulation Accuracy | 0 | — | 10 | % | △Vout/△Vin |
| Response Time of Voltage Regulation | 0.0025 | — | 0.025 | s | the period of output voltage |
| Adjustable Output Current Range | 0 | — | 1.5 | A | Low power |
| 0 | — | 3 | A | Medium power | |
| Output Power | 0 | — | 330 | VA | Low power |
| 0 | — | 660 | VA | Medium power | |
| Output Frequency | 40 | — | 400 | Hz | |
| Frequency Adjustment Accuracy | 0.1 | Hz | |||
| OutputWaveform | sine | ||||
| Soft Start Time | 0 | — | 10 | s | Factory Default Value:0.5 |
| On/Off Delay Time Range | 0 | — | 20 | s | Factory Default Value:0.2 |
| On/Off Delay Time Accuracy | 0.1 | s | |||
| Overheat Protection Trigger Temperature | 58 | 60 | 66 | ℃ | |
| DC Control Output Current | 0 | — | 200 | mA | |
| Analog Control Signal | 1-5 | V | Renctespeed Control Voltage | ||
| Digital Control Signal | 24 | V | Switching Signal | ||
| Adjustment Method | 6 | Button | |||
| Standby Power Consumption | — | 3 | W | ||
| Display Method | 5 | Digit | LED DigitalTubes | ||
| Ambient Temperature | 0 | 25 | 40 | ℃ | No Condenstion |
| Ambient Humidity | 10 | 60 | 85 | % | |
Reviews
There are no reviews yet.