Bowl Feeder Controller SDVC31-M 3.0A

The Bowl Feeder Controller SDVC31-M 3.0A is a reliable solution for controlling vibratory bowl feeders in industrial settings. It features high-precision voltage stabilization, adjustable slow start, full/empty stop, remote speed control, and DC control output for efficient material handling.

Send Inquiry

Description
Reviews (0)

Features

High precision automatic voltage stabilization
Adjustable slow start
Switch sensor full/empty stop
Photoelectric sensor full/empty shutdown
Remote speed control
DC control output

Basic function

Frequency adjustment: Users adjust controller frequency to optimize vibrating body for smoother, quieter, and energy-saving feeding.
High-precision automatic voltage stabilization: Digital circuit stabilizes voltage, automatically correcting feeding speed changes due to power supply fluctuations.
Adjustable slow start: Output voltage gradually increases from zero to preset to minimize impact on the vibration plate when starting.Users can digitally preset the slow start time. It supports NPN type sensors or PLC remote full/empty shutdown control.
Switch sensor full/empty stop: Support NPN type sensor or PLC remote full/empty stop control.
Photoelectric sensor full/empty stop: support photoelectric counter sensor full/empty stop control.
Remote speed control: the controller can directly use the external potentiometer, PLC or 1-5V voltage signal to control the output voltage remotely.
DC control output: the controller can output DC low voltage control signal to drive the solenoid valve and other devices to work with the controller.
Keypad lock: Long press the on/off key to lock all keys to prevent users from misoperation.
Maximum Output Voltage Setting: Set the maximum adjustable voltage to prevent the user from misoperation and outputting too much voltage to damage the vibration equipment.
Overheating protection: When the controller working temperature is too high, it will stop output to protect itself.
Over-current protection: When the working current of the controller exceeds the rated current, the system stops the output to protect the controller and vibration equipment.
Recoverable short circuit protection: When a short circuit occurs at the output, the system stops the output and does not blow the fuse to protect the controller and vibration equipment. After the short circuit is cleared, the system can be re-energized to work normally again.

Technical specification

Item	Range			Unit	Description
Item	Minimum	Typical	Maximum	Unit	Description
Input voltage	85	220	260	V	AC effective value
Output voltage adjustment range	0		260	V	Less than 150% of input voltage
Voltage adjustment accuracy	1			V
Voltage regulation accuracy	0		10		Vout/Vin
Voltage regulation response time	0.0025		0.025	s	One-tenth of the output voltage cycle
Output current adjustment range	0		1.5	A	SDVC31-S-Small Power
Output current adjustment range	0		3	VA	SDVC31-M-Medium Power
Output power	0		330	VA	SDVC31-S-Small Power
Output power	0		660	VA	SDVC31-M-Middle Power
Output frequency	40		400	Hz
Frequency adjustment accuracy	0.1			Hz
Output waveform	sine
Slow start time	0		10	s	Factory default 0.5
Delay time range	0		20	s	Factory default 0.2
Delay time accuracy	0.1			s
Overheat protection temperature	60	65	65	℃
DC control output voltage	22	24	26	V
DC control output current	0		200	mA
Analog control model	1-5			V	Remote speed control voltage
Digital control signal	24			V	Switch signal control
Adjustment method	6			key
No-load power consumption		3		W
Display mode	5			digit	LED digital tube
Wage environment temperature	0	25	40	℃	No condensation
Wage environment humidity	10	60	85	%	No condensation